Okay, you went out and took photos at an event or in a place of interest. You saw other photographers doing the same thing, so you naturally sought out their images to see how they compared to yours.
Your conclusion? Your images sucked. Now what?
I've seen multiple posts that assert or imply that their images failed compared to those of others because of a difference in gear. Worse still, some believe it was because of a different brand of gear.
I suppose it's possible that other photographers were using better gear than they were. Pro-grade lenses, in particular, can have a dramatic impact on what results can be produced. As much as I like, say, the Nikon 180-600mm f/5.6-6.3 VR lens, at both 400mm and even 560mm my 400mm f/2.8 TC VR S lens produces clearly better looking results, plus it has both light collection and background isolation capabilities I tend to take advantage of.
But is Sony's 400mm f/2.8 lens better than my Nikon? Well, the FE-mount Sony could use a built-in teleconverter, but at 400mm f/2.8 I'd take either lens and be happy. So in any near apples-to-apples comparisons, I tend to say "it isn't the brand."
The real question you have to ask yourself when you start comparing other photographer's images to yours isn't "what gear were they using?" Instead, it's "What exactly did I fail at?"
It's also important that you realize there was a failure. Failure isn't bad. That's not just my Silicon Valley start-up mentality speaking, it's a reality: failure is one of the best ways to learn. But you only benefit from failure if you (a) can admit that you failed; and (b) identify what the actual failure was.
Admission
Let's discuss that (a) part for a moment (admitting failure). More often than not when I see someone comparing their images to others they simply won't admit to failure. It's their image in the competition, so they like their's better, and believe it should have won.
Often they even won't listen to any criticism from others because their ego is on the line. As far as I'm concerned, if you're open to criticism, I think you're a far better person than the one that simply insists that they have done something good and accepts no criticism.
So before we even get into reason for failure, are you even admitting you sometimes goof up? If not, why not?
I fail constantly. I get absolutely giddy when I don't fail because it happens so rarely.
The Actual Failure
How do I fail?
- Not being in the right place at the right time. With both sports and wildlife, my two main photographic pursuits these days, both things are critical to get the photo that everyone else will ooh and ahh over. In both sport venues and out in the wilds I'm constantly asking myself two questions: (1) am I in the right place, and (2) what do I expect to happen? If I can't answer these two questions, I know I'm going to fail. Either that or I'm going to get damn lucky.
- Not having the camera set correctly. Some of you think of me as a grumpy old man constantly criticizing Nikon's control choices. All of those things—grumpy, old, man, critical—are true, but the last one would still be true if I were instead a happy young woman. Photos are moments in time. You may be prepared for one thing to happen but another starts to occur and you often need to reset your camera for that. If I can't do that with a quick button press and maybe a dial twirl, then Nikon has restricted me in a way they shouldn't. Bad Nikon! If I can make those changes but don't make them: Bad Thom!
- Trying to do too many things. A pride of lions is on the hunt, what photo am I going to get? Well, I want one of everything! The stalker, ambusher, the chaser, the prey reaction, the pull down, the bored younger male waiting for his meal, etc. If I'm lucky I'll get one of those. First, everything happens so fast and happens over such a large area, there's no way I can cover all those things. Second, lions are the fastest accelerators in Africa, so I'd better make my decisions quickly and be fast with the shutter release. Don't like the wildlife example? Try sports. The team I'm covering is about to score and I know the play (yes, that happens when you follow a team closely and talk with the coaches). Do I cover the quarterback throwing the ball or the receiver catching the ball? I can't realistically do both these days, as sideline access is so packed you can't get the position where you might be able to do that. Now me being an analytical kind of guy, I would pick "receiver" because technically, he's the one that's scoring and the one most likely to celebrate. Still, my point here is that if I think I'm going to do everything I'll probably get nothing (fail).
I could go on, but you should be starting to understand the (b) part I described above (ID the failure). I'm always analyzing what exactly caused my failure.
I should also point out that I might take 500-1000 images in a day's work. Of those, as many as 999 can be failures if I got the image I sought. Realistically, maybe 10-20 of my images in a day are one's that most of you would consider successes. But I also have days where none are. Yep, that's depressing, but it's sort of the point of this article: what happened? I have to fix that.
Why did I fail?
Now that I've admitted I've failed and have identified the actual failure, it's time to go deeper on the latter and really try to sus out the why.
Broadly speaking, we have a few categories to consider:
- Wrong gear. I've written this before, but I had a sadistic boss when I started out covering sports; he sent me out with the wrong equipment for every job. Always. He sent me to a track meet once with a TLR (Twin Lens Reflex) and asked for action photos of the running events. When you look down into the viewfinder of a TLR, everything that's moving left-to-right in front of you is moving right-to-left on the focus screen! This boss's thinking was "this will make him really think about what's important, and it isn't gear." He was right. Even 50+ years ago I was dealing with the "best camera is the one you have with you" thing. Sure, blame the gear, but don't think that absolves you. You were the one that failed with the gear you had. Perhaps it was because you bought or brought the wrong gear. Fix that.
- Wrong technique. We've got a plethora of technique type things that can cause image failure: exposure, camera settings, aperture, shutter speed, camera handling discipline, and so on. These fall into two sub-categories: (a) you made the wrong choice; or (b) you haven't mastered something. Both things are solved by first understanding what caused the problem, then learning how to overcome it, and finally practicing until the right technique becomes second nature. Practice that.
- Unclear concept. A photograph is your statement about something. Do you know what that "something" is? If you know the something, do you know what you're trying to say about it (your "statement")? My mentor Galen Rowell used to spend weeks prior to big trips conceptializing. He knew well before hand not just what it was he was likely to encounter, but he knew its history and context. He'd think about the likely ways he could capture those "somethings" and make a "statement" about them. He did not wait until he was standing there having discovered "something" for the very first time and then spontaneously try to frame it before it went away. Moreover, as he was walking through an environment—Galen was mostly an outdoor adventure photographer—he also collected thoughts about how the place made him feel. He would contemplate how that might translate into a photo as he moved down the trial (or up the cliff). If you asked him, he always had a concept of what it was his next photo might be before he pressed the shutter release. Here's one way I deal with that with students: you can't press the shutter release until your photo has a name. You don't have a clear concept if you can't name it. Name that.
- Poor choices. f/4 at 1/2000 and ISO 100 is the same exposure as f/22 at 1/500 and ISO 12800. One of those is probably not a good choice for a landscape photo where you want to resolve details. Sometimes gear choices intersect with this, as you can't get to f/4 on some consumer zoom lenses at certain focal lengths, but I constantly find people getting all or most of the above items right and still managing to do something clearly wrong with an in-the-moment choice. Note that it's always preferable to "press the shutter release" when a moment comes—take a photo—but you need to quickly realize that you are set wrong, make the necessary setting change, and hope the moment is still there or comes again. Better still, you need to get good at anticipating the moment. Every photographic specialty has its moments, and you can learn which ones are likely so that you can be set correctly. Choose wisely.
- Bad processing. This one starts to happen in camera with wrong technique and bad choices, but much of the time it really happens back at home when you're either trying to "fix" those things or enhance the image. Here's a little surprise for you: your camera has more dynamic range than you're likely going to be using. Your eye can only process a max of eight stops at a given time (pupil dilation increases that, but that's over time). A print also maxes out at about eight stops, but is probably less for many papers and inks. The least common denominator of displays (sRGB 8-bit JPEG) is going to restrict you to six stops. Holy bit depth, Batman, that's not much! If you're twiddling the Exposure, Highlights, Shadows, Whites, and Black sliders in Lightroom, you'd better know what you're actually doing and what you're trying to show. In essence, you move tonality, spread it (add contrast), or contract it (reduce contrast), and you may do that with different ranges of tonalities independently. Most people do this willy nilly until it "looks good" to them, and often without considering how it's going to be viewed. But there's also the issue of did they correctly control what the camera did. The number one sin tends to be underexposing in the camera in a way that forces the user to move the primary subject's tonality significantly upward in post processing, which exposes noise, which leads to noise reduction, which leads to edges not looking quite natural. You know who thought extensively and wrote about all those things in great detail? Ansel Adams (though it helped that most of the time he was not considering color). Go Ansel.
I don't tend to fail at #1 or #2. I can sometimes make a #4 failure. #3 is something I used to have big problems with, but Galen set me on a path towards correcting that. I was also very lucky to work with and study a couple of the very best post processors in the business early on, as well, so usually if I have a #5 failure, it's because I'm working too much in a hurry or I just set my camera so poorly that the image problems aren't recoverable.
Full Speed
Oh dear, all that analyzing I keep telling you to do brings up another issue: speed. The only way you can work at speed and not keep failing is by practicing enough so that everything becomes second nature. Even then you'll make a mistake or two from time to time.
One thing I've noticed in watching people photograph—and I do that any chance I can get, because it's so informative—is just how many people use the following strategy: (a) move to a place; (b) pick up the camera; (c) take a quick photo; and (d) move on. No time contemplating, no looking at possible variations, no time checking or making settings, no questioning their choices, and often very bad handling because they're moving so quickly doing things. I expect those folk to fail.
And again, failure is not a bad thing, as long as you take the time to learn from it. So be honest with yourself. Get others to help you evaluate what you're doing and what your results are. Seek advice. Be open and ready to change (and practice, practice, practice; you might make it to Carnegie Hall!).
Still need motivation to tackle failure? Here's the kicker: people who fail a lot and take the time to learn from that are the ones who progress the fastest and the furthest.